Description

Original USB Ninja Pro Cable and remote controller to hack Pentesting With Android App Support Layout US

Three Distinct Modes

Programming

Because the device acts as a standard USB cable, it needs to be pushed into programming / DFU mode. This is done by using the “Programming Ring”.

The Programming Ring must be placed on the host-side plug within three seconds of being connected to the programming / host computer.

This will place the device in programming mode, and allow for payloads to be uploaded to the device.

Programming is possible via the standard Arduino IDE.

Deployed

The device is ‘Deployed’ when it is connected to the target machine.

It will operate as a standard USB cable, allowing for data transfer and power transfer. It is able to stay in this state indefinitely until it is triggered.

Triggered

The device is triggered wirelessly via Bluetooth. It can be triggered by smartphone, or by dedicated remote control.

What’s new on USBNinja Professional

1. Easy to use, no need for complicated ARDUINO configuration and download process, no longer need a magnet to enter DFU mode, all configurations only need one mobile phone.

2. The mobile APP can view and edit the PAYLOAD script in USBNINJA online, and it can be triggered in real-time. It is no longer necessary to get back USBNINJA CABLE to update the payload. Both google play store and apple store have been put on the shelves and are available for download.

3. Mobile APP can change parameters such as VIDPID and manufacturer name online.

4. APP uses fingerprint facial recognition to enter, more secure.

5. Built-in 120KB native memory disk can be selectively mounted, U disk and HID device coexist at the same time, can be used to copy or transfer files when there is no network

6. Added self-destruct mode, clear firmware, leaving no trace.

7. Native USB2.0 typing speed is 3 times faster than before, typing feedback capture, fast leaking

8. Automatically detect caps lock and accurately enter all upper and lower case characters.

9. The new remote control can choose 8 SLOT and 8 PAYLOAD remote control trigger, 20kb for each payload.

10. The new remote control supports Bluetooth 5.0 mode, and the empty card distance is increased by 30%.

11. The launched ultra-small micro-module can be built into USBNINJA in a small space USB device. User-friendly and flexible DIY.

12. The operating current of USBNinja Professional is only 0.4mA. The detection of USBNinja Professional is not that obvious.

Improvement

Old USBninja only can be programed by computer (Arduino) , The USBninja Pro support Ducky script, can program by APP on android or IOS.

Edite payload on the air. Also, we have 120KB U disk inside cable, Used to store some files or transfer some important files.

Professional would be a improved verison of the old usbninja.

With a bigger memory and easier programming language and live control

You can do so much with the professional version. 

New Commands Added

GETTING STARTED WITH YOUR USBNINJA

I. INSTALL ARDUINO APPLICATION AND DRIVERS.

1. First download the appropriate Arduino package at the Arduino.cc Website: https://www.arduino.cc/en/Main/Software

Then download the boot driver.

Website: https://usbninja.com/drivers_tools/USBninja_BOOT_driver.zip

2.Install or Unzip the Arduino application,and install drivers.

3.Run the Arduino application.

4.In the Arduino application go to the “File” menu and select “Preferences”

5. In the box labeled “Additional Boards Manager URLs” Enter: http://usbninja.com/arduino/package_USBNinja_index.json and click OK Note: If you already have additional URLs entered in that box, then click the button on the right of the box and enter this URL on a new line.

6.Go to the “Tools” menu and then the “Board” submenu – select “Boards Manager” and then from the type drop down select “Contributed”:

You’ll see the download progress on the bottom bar of the “Boards Manager” window, when complete it will show “Installed” next to that item on the list.

7.With the install complete, close the “Boards Manager” window and select the “USB Ninja Boards” from the Tools→Boards menu. “USB Ninja cable(BLE+Hall sensor)” is the board that should be selected by all new users.

The Arduino application install is now complete!

II.CONNECTING AND PROGRAMMING YOUR USBNINJA

1.Select“File”→“Examples”→“NinjaKeyboard”→“BLERemoteKeyboard”,Open the example.

2.Click the “Upload” in the upper left corner. After compiling, start looking for device upload firmware. There will be 60 seconds to go.

3.Plug in the USBninja cable into the computer.  The magnetic ring should close to the end of the plastic shell at sametime. If there is no magnet trigger, the cable will not enter programming mode. Or plug in first, then close the magnet, and it will not enter the programming mode too.

4.After plugging in,Feel free to remove the magnet. After 2 sec, Start uploading firmware.

The Firmware upload is now complete!

TECHNICAL RESOURCES:

Setting up your USBNinja：https://usbninja.com/help/

Installing the USBNinja Driver：https://usbninja.com/help/install-arduino-application-drivers/

Using an Android Phone to Trigger a Payload：https://usbninja.com/help/using-android-phone-to-trigger-payload/

Assembling a USBNinja Remote：https://usbninja.com/help/assembling-of-remote/

USBNinja Remote Password Updating：https://usbninja.com/help/how-to-change-password-for-remote-via-usb-port-on-computer/

USB Ninja FAQs：https://usbninja.com/help/faq/

Android App

https://github.com/USBNinjaRRG/USBNinja-android

Main Software Project

https://github.com/USBNinjaRRG/USBNinja